![](https://www.indiaherald.com/cdn-cgi/image/width=750/imagestore/images/breaking/134/csr-report-confirms-wrong-signaling-caused-odisha-train-accidentdfffb4e5-7276-4389-b8fa-62d3b721706a-415x250.jpg)
It is known that the odisha train accident which resulted in the death of 292 innocent passengers and over 1000 injuries has shocked the entire country. However, the cause of this accident is only due to wrong signals. It is known that the Railway Board immediately appointed a CSR for the accident that took place on june 2.
CSR who conducted a long investigation stated the reasons for the train accident. It said that the train accident was caused due to wrong signalling. An investigation report to this extent has been submitted to the Railway Board. Mainly, the board concluded that the cause of the accident was due to errors in the switching of the signaling circuit.
Indian Railways is one of the largest systems in the world. This department hides the results including the consequences, wherever it happens, and makes sure that such things do not happen. But in recent times, the Commission has erred in not learning such lessons. Similar to the incident that took place at Bahanaga railway station in odisha, it was said that it also happened in Kharagpur on May 16, 2022.
She said that if Taluk had learned the lessons of the tragedy then and corrected it, this tragedy would not have happened now. According to the report, the accident occurred in Kharagpur division due to wrong wiring and wrong cable. The CSR has made it clear in its report that the odisha accident would not have happened if the wrong wiring problem had been solved by taking steps to correct it